A-A-55018
be as specified in 2.14. The cut edge of the kerf shall be square. When
specified (see 6.1), a sample of SAE 1020 low carbon steel 6 inches thick and
The time required for the 12 inch cut shall be
12 inches wide shall be cut.
not greater than 2 minutes. When specified (see 6.1), a sample of SAE 1020
low carbon steel 1/4 inch thick shall be used to cut the minimum, a 4 inch
diameter or the maximum, a 54 inch diameter circle. When specified {see
6.1), both circles may be required. The accuracy of the cuts shall be as
specified in 2.14.
4.3.4 Environmental protection certification of conformance. The
contractor shall certify and maintain substantiating evidence that the
product offered complies with all applicable environmental protection
regulations. The Government reserves the right to require proof of such
conformance prior to first delivery and thereafter as may be otherwise
provided for under the provisions of the contract.
5.
PRESERVATION, PACKAGING, PACKING LABELING, AND MARKING
5.1 Preservation, packaging, packing, labeling, and marking.
Preservation, packaging, packing, labeling, and marking shall be as specified
in the contract or purchase order.
NOTES
6.
6.1 Ordering data. Purchasers should select the preferred options
permitted herein, and include the following information in procurement
documents.
a.
Title, number, and date of this commercial item description.
b.
Quantity required.
c.
If torch is to be used with different type, gas, specify type
(see 2.7).
d.
Additional tips, of required, describe in detail (see 2.8).
e.
Additional lengths of interconnectable track, if required (see
2.10).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business