MIL-C-80036C
p a r e n t p l a s t i c f o l d e r , o r permanently sealed between clear plastic sheets,
The chart or plate shall contain the fol-
with suitable means of mounting.
l o w i n g information:
P o i n t s of lubricant application
S e r v i c i n g interval
T y p e of lubricant
Viscosity
3 . 1 0 . 2 Nameplate.
U n l e s s otherwise specified (see 6.2.1), a nameplate
shall be securely attached to each machine. The nameplate shall contain the
information listed below.
I f the machine is a special model, the model
designation shall include the model of the basic standard machine and a suf-
f i x identified in the manufacturer's permanent records. The captions listed
m a y be shortened or abbreviated, p r o v i d e d the entry for each caption is
clear as to its identity.
Nomenclature
Manufacturer's name
Manufacturer's model designation
M a n u f a c t u r e r ' s serial number
P o w e r input (volts, total amps, phase, frequency)
Contract Number or Order Number
National Stock Number or Plant Equipment Code
Date of manufacture
Hour meter. When speci f i e d ( s e e 6 . 2 . 1 ) , t h e machine shall be
3.11
The h o u r meter shall be installed to display
equipped with an hour meter.
accumulated operating time of the drive system.
The meter shall be of the
nonresetting type and shall have a range of O to 99,999 hours in increments
of one hour. The meter shall be sealed-to prevent the entrance of dust and
moisture and shall be mounted to withstand shock and vibration generated by
the machine.
Upon reaching the maximum accumulative hours, the meter read-
o u t shall automatically revert to zero and continue to totalize time.
3 . 1 2 Technical data.
W h e n technical data is required it shall be fur-
n i s h e d in accordance with the requirements of the contract.
A l l technical
data shall be in the English language.
Workmanship of the machine and accessories shall be
3.13 Workmanship.
o f a quality equal to that of the manufacturer's commercial equipment of the
t y p e specified herein.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection.
U n l e s s otherwise specified in the
c o n t r a c t or purchase order, t h e contractor is responsible for the perform-
a n c e of all inspection requirements specified herein.
Except as otherwise
s p e c i f i e d in the contract or purchase order, the contractor may use his own
o r any other facilities suitable for the performance of the inspection re-
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business