MIL-C-80036C
When only one system of graduation is acceptable, the particular graduation
Regardless of the measurement
required shall be as specified (see 6.2.1).
system used, all measuring and indicating devices on the machine shall be
graduated in the same system.
3.2.2 Reclaimed materials. The machine may contain reclaimed materials
provided such materials will not jeopardize the machine's intended use and
The reclaimed materials shall have been reprocessed, remanu-
performance.
factured, or recycled in a manner which will restore them to the same chemi-
cal composition and physical properties as the materials originally selected
for use on the machine.
The cutting machine and all its applicable
3.2.3 Energy efficiency.
components that directly consume energy in normal operation shall be design-
ed and constructed for the highest degree of energy efficiency as governed
by the latest developments available within the industry.
3.2.4 Controls. All operating controls shall be located convenient to
the operator at his normal work station.
3.2.5 Safety and health requirements. Covers, guards, or other safety
devices shall be provided for all parts of the machine that present safety
hazards. The safety devices shall not interfere with the operation of the
machine.
The safety devices shall prevent unintentional contact with the
guarded part, and shall be removable to facilitate inspection, maintenance,
All machine parts, components, mechanisms, and
and repair of the parts.
assemblies furnished on the machine, whether or not specifically required
herein, shall comply with all of the requirements of OSHA 2206 that are
applicable to the machine itself. Additional safety and health requirements
shall be as specified (see 6.2.1 and 6.4).
The machine shall not contain mercury or
3.2.6 Mercury restriction.
mercury compounds nor be exposed to free mercury during manufacture.
3.2.7 Asbestos restriction. Asbestos and materials containing asbestos
shall not be used on or in the machine.
The machine shall be so designed and
3.2.8 Environmental protection.
constructed that, under the operating, service, transportation, and storage
conditions, described herein, the machine shall not emit materials hazardous
to the ecological system as prescribed by Federal, state, or local statutes
in effect at point of installation (see 6.4).
Unless otherwise specified, the machine shall be equipped
3.2.9 Fuel.
When specified (see 6.2.1), the cutting
for use with acetylene fuel gas.
machine shall be equipped for use with the fuel gas specified.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business